Your cart is empty

Anthracite

ILLUSTRATION &
PART NUMBER
DESCRIPTION SUGG. RETAIL

PAGE 4 - 13

 

     Anthracite

$51.00
$65.00
$80.00

$36.00
$48.00
$56.00

Anthracite

Although its potential for water treatment has been recognized since ancient times, anthracite coal was not used for that purpose until the beginning of this century. Crushed
anthracite makes an excellent medium density filtration media. Anthracite has been manufactured from the finest Pennsylvania coal since 1932. It is specifically selected for
water treatment, and during its production goes through several sizing inspections. Random samples are chosen for a complete laboratory quality control analysis for effective size, uniformity coefficient, specific gravity acid solubility and hardness.

Because of its fractured shape, some sediment penetrates deeper into the bed. When compared to equivalent filter sands, this means longer filter runs and less head loss.
Backwash rates are also reduced.

Anthracite, because of its unique density, can be used in
multi-media filters. At 56 lbs./ft.3 it will hydraulically classify
and remain above heavier medial such as Filter Sand or
Manganese Greensand providing a prefiltration layer.

Advantages:
- Higher service flows and longer filter runs than equivalent sand filters.
- Close attention to gradation, hardness and purity assures con sis tent
   and reliable performance.
- Unique density allows Anthracite to be combined
   with other filtration media in multi-media filters.

Physical Properties:
- Color - Black
-l Density - 50 lbs./cu. ft.3
- Effective Size - #1 (0.6-0.8 mm),
   #1-1/2 (0.85-0.95 mm), #2 (1.7-2.0 mm)
- Uniformity Coefficient - #1 (1.5), #1-1/2 (1.6), #2 (1.5)
-l Mesh Size - #1 (14 x 30), #1-1/2 (10 x 20), #2 (14 x 12)
-l Sphericity - 0.6
-l Hardness - 3.0-3.8 (Moh's Scale)
-l Acid Solubility - <1%
-l Caustic Solubility 0 <1%
- Apparent Specific Gravity - 1.65
- Meets American Water Works Association Standard -
   B100-89

Conditions for Operation:
- Bed Depth - 24 - 36 in.
-l Backwash Rate - #1 (12-18 gpm/ft.2),
  #1-1/2 (18-25 gpm/ft.2),
  #2 (use air scour)
-l Backwash Bed Expansion - 30-50% of bed depth
- Service Flow Rate - 5 gpm/sq. ft. or higher depending
  upon local conditions.


PAGE 4 - 13